What is difference between weldolet and Sockolet?
What is difference between weldolet and Sockolet?
A sockolet has the same basic design as a “weldolet” or “threadolet” where the major difference is that a sockolet has a socket for welding while the weldolet has got a buttweld connection. This makes a 90° branch and comes in full size or reducing for a straight piece of pipe.
What are weldolet and Sockolet and where they are used?
The sockolet and weldolet are fillet welds that link the run pipe to the sockolet and weldolet. Its fundamental architecture is similar to that of a weldolet, with the exception of the branch connection. The sockolet’s socket is used to enter a basic end branch pipe, which is then fillet welded together.
What are Weldolets used for?
Weldolets are used to provide an outlet area from a larger to a smaller pipe connection point. The weldolet is welded to the larger pipe (the run) and connected to the smaller pipe (the branch).
How many types of weldolet are there?
There are 13 types pipe olets fittings, and sockolet, weldolet and threadolet are mostly common used. Their names depend on how they are connected to the branch. Weldolet has a butt welded connection, threadolet has threaded connection, and sockolet has welded connection.
What is a Branchette?
These industries include pipeline, refinery/chemical, power plants, shipbuilding as well as those industries that process food, beverages, pulp and paper, and pharmaceuticals. Integrally Reinforced Branch Connections designed and manufactured by WOI are known as Branchettes®.
What is a Latrolet?
What is Latrolet? Latrolet is a type of self-reinforced branch fitting developed by a Company called Bonney Forge. Latrolet that is used for taking branch which is not at 90 degrees to run pipe. Latrolet comes in 45°or any other special degree as required by the purchaser.
What is Threadolets?
Threadolet is a type of self-reinforced branch fitting developed by a Company called Bonney Forge. It is used whenever threaded branch connections are required from the pipe header. Mostly, it is used for small size piping with a low-pressure application. Threadolets are available in full size or reducing size.
How do I choose a weldolet?
A weldolet is designated by the run length by the branch length. For example a 6-inch weldolet on a 10-inch pipe would be a 10×6 Weldolet.
What is a sock O let?
A Sockolet is similar to a Weldolet, with the difference that the branch pipe is connected to the run pipe, via the fitting, with a socket weld connection as per ASME B16. 11. Likewise Weldolets, Sockolets are used to make a 90-degree pipe branch. Sockolets may be “size on size” or “reducing”.
What is a Megalet?
Among the branch outlet fittings, the so-called MEGALETS stand out, self-reinforcing branch outlets with a traditional 90° conformation to the main pipeline. Depending on the different configurations, they are divided into: LATROMEGALET that can be installed to obtain a branch outlet with an angle other than 90°.
What is a Sweepolet?
Sweepolet® Sweepolet® is a contoured, integrally reinforced, butt-weld branch connection with a low stress intensification factor for low stresses and long fatigue life. The attachment weld is easily examined by radiography, ultrasound and other standard non-destructive techniques.
What is an Elbolet?
Elbolet is a type of self-reinforced branch fitting developed by a company called Bonney Forge. It is used on Long Radius Elbow for instrument connections such as thermowell.
What is Sweepolet?
What type of weld is a weldolet?
butt-weld fitting
Weldolet® is the most common of all branch connections, and is welded onto the outlet pipe. The ends are bevelled to facilitate this process, and therefore the weldolet is considered a butt-weld fitting. Weldolet’s are designed to minimize stress concentrations and provide integral reinforcement.
How do you size a weldolet?
Full size is when you take a branch of the same size as run pipe size for example 3 inches to 3 inches. And reducing size is when branch size is less than run pipe size. For example, 3 inches to 1 inch. Weldolet’s end is suited for the butt welding connection.
What is a Threadolet?
What is a Flatolet?
Flatolet is a regular olet engineered to go on a large radius, essentially flat, header. The basic design of a flatolet is same except the flat base.
What is MSS sp97?
MSS SP-97-2019 includes essential dimensions, finish, tolerances, testing, marking, material, and minimum strength requirements for 90° and 45° integrally reinforced forged branch outlet fittings of buttwelding, socket welding, and threaded types.
How do I order Weldolet?
A weldolet is designated by the run length by the branch length. For example a 6-inch weldolet on a 10-inch pipe would be a 10×6 Weldolet. A weldolet is designed to minimize stress concentrations and provide integral reinforcement without the need for reinforcing the weld.
What B16 11?
ASTM B16.11 is the standard used for the forged steel fittings which includes socket weld and threaded. fittings type. This standard is available in carbon steel, alloy steel and stainless steel materials. 45 and. 90 degree elbow, its size range is 1/2” to 4”, and the classes of the product are ranging in 3000, 6000.
What is the size of the thredolet and sockolet?
Size consolidation for Weldolets only Class 6000 Thredolet, Class 6000 Sockolet, XXS Nipolet Run Sizes Outlet Size Inches 1/4 3/8 1/2 3/4 1 1 1/4
What are the outlet sizes for weldolets?
Outlet sizes 8, 10, 12, 14, 16. 18, 24, 26. 20 order to specific size combination. Size consolidation for Weldolets only Class 6000 Thredolet, Class 6000 Sockolet, XXS Nipolet
What are the dimensions of a sockolet Weld outlet?
Socket Weld Outlets / Sockolet® Dimensions Socket Weld Outlets / Sockolet® Run Size Socket Weld Outlets / Sockolet® Dimensions REDUCING SIZES CL 3000 Outlet Size Inches Dimensions Appx. Wt Pounds A B C D E 1/8 3/4 1 5/8 0.269 9/32 0.10 1/4 3/4 1 5/8 0.364 9/32 0.10 3/8 13/16 1 1/4 3/4 0.493 […] +91-9820672013