How much does it cost to strip and refinish a dresser?

How much does it cost to strip and refinish a dresser?

It will cost between $300 and $2,000 to refinish your dresser or bedroom dresser set. As with other wooden furniture, the process involves stripping old finishing and applying a new coat.

How much does it cost to Restain wood furniture?

Cost to Refinish Wood Furniture The average price to refinish a wood furniture piece ranges between $100 and $6,000 per item. Because most homes have multiple wood pieces, wood is the most common material being refinished.

How much does it cost to get furniture sanded?

Furniture refinishing cost:

National average cost $500
Average cost range $357-$582
Low-end cost $167
High-end cost $2,405

How much does it cost to refinish a table yourself?

The minimum cost to refinish a wood table is $80. The maximum cost is $700. Your project’s cost will largely depend on table size. The project may cost as little as $20–$120 if you do it yourself….Highlights.

Average Cost Low End High End
$250 $80 $700

Is it worth it to refinish furniture?

“The basic rule of thumb is, if the piece was made before 1850, you want to do some homework on whether it should be conserved rather than restored — meaning to preserve and stabilize the piece as it is now,” she says. “If it’s been in the family a while, it’s worth finding out before you do some damage.”

How much does it cost to refurbish a dresser?

Refinish Furniture Costs

Item Unit Cost Cost
Basic dining chairs $40-$60 per hour $120-$300
Bar stools $40-$60 per hour $120-$180
Free-standing cabinets or armoires $40-$60 per hour $600-$1,200
Dressers $40-$60 per hour $280-$960

Is it worth it to refinish wood furniture?

How hard is it to refinish furniture?

Refinishing is an easy, low-cost way to bring out natural beauty in wood furniture and make fine details shine. After clear coating, let your finished piece fully cure in a warm, dry, well-ventilated area for 24 hours before use. Your options for staining are limitless.

Is it difficult to refinish furniture?

Is it better to sand or strip furniture?

As long as you have enough patience to wait for the solvent to dissolve the finish, it is almost always better to strip than sand. Fortunately, older furniture that is finished with shellac or lacquer dissolves quickly, turns to sludge, and easily wipes off.

Does refinishing antique reduce value?

Refinishing valuable American masterpieces can diminish the value, or painting over or removing hand-painted techniques can reduce the integrity of an antique. However, in general, cleaning and restoring old furniture can add value and help bring it back to life.

How do you tell if you can refinish wood furniture?

Does refinishing antique furniture devalue it?

Much of the value of antiques comes from their age. The patina, or surface wear or oxidation, of a piece is evidence of its age and history, so in most cases, it is prized by collectors. If you destroy the patina during the restoration process, you can dramatically decrease the value of the item.

Is it better to strip or sand furniture?

How much does it cost to sand furniture before staining?

Sand the wood twice with a medium grit sandpaper (100 to 120-grit) and twice with a fine grit sandpaper to remove any imperfections and prepare the surface for stain. Clean the wood with a damp rag twice, which serves to both remove any debris and condition the wood.

Why do people strip wood before sanding?

Stripping a finish is faster than sanding to remove it. This is one I come across often. People tell me in one way or another, that they are going to sand off the finish or paint. So then I point out that stripping is faster, and in the case of paint could even be safer than sanding.

What is the easiest way to refinish wood furniture?

Below are six essential steps that address how to refinish wood furniture and how to strip finished wood:

  1. Step 1: Clean the Piece.
  2. Step 2: Assess the Furniture’s Current State.
  3. Step 3: Remove Old Finish.
  4. Step 4: Apply a Coat of Sealant.
  5. Step 5: Stain or Paint the Wood.
  6. Step 6: Apply a Coat of Finish.

Should you Restain antique furniture?

Does painting wood furniture ruin it?

Slapping any old paint on the furniture can turn into a disaster. Take time to consider what your best paint options are, or leave the furniture as it is. – Painting furniture is a skill that takes time to master. It is a bad idea to simply attack a piece of wood furniture with a paintbrush or spray can.

When can you not refinish antique furniture?

If it’s a cheap mass-manufactured piece made of particleboard or MDF with a foil or laminate finish, don’t bother refinishing, as it won’t be worth your time, and even paint won’t adhere well to the smooth, plastic-like surface (and is akin to putting lipstick on a pig).