How do I reset my Sportdog remote?
How do I reset my Sportdog remote?
Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. You may need to hold both units 2-3 feet from each other before this occurs. Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has been reset and will begin flashing as normal.
How do you reset a dog collar?
More videos on YouTube
- Turn the Collar Receiver off.
- Press and hold the On/Off Button.
- After the Receiver Indicator Light has turned off, release the On/Off Button.
- Press and hold the Continuous Stimulation button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times.
How do you pair a dog remote control?
Match the Remote Control to the Receiver: Connect the Receiver to a power source via the USB cable, matching mode can only be activated during charging. Press and hold Channel Switch / Match Button for 5 secs. The Receiver will vibrate and beep which indicates the matching is complete.
How do you reset a dog shock collar?
How do I pair my dogs collar with Nvk?
Pairing
- Make sure the Receiver is turned off.
- Press and hold Switch for 5 secs until the green light is flashing fast.
- Press the remote Pairing/Channel Select button D to paring the receiver.
- Pairing successful: the receiver will beep and t he green light flash slowly.
Can you put two shock collars on a dog?
For families that have more than one dog, using a multi-collar system can save time, effort and money. Instead of needing to buy a separate transmitter and collar for each pet, it’s possible to simply use one transmitter and multiple collars.
How do I reset my SportDog remote?
Why is my SportDog collar flashing red?
The flashing light indicates the Collar Receiver is ready to receive a radio signal from the Remote Transmitter.
How do I reprogram my dogs remote control?
How do you program Nvk collar to remote?
Make sure the Receiver is turned off. Press and hold Switch for 5 secs until the green light is flashing fast. Press the remote Pairing/Channel Select button D to paring the receiver. Pairing successful: the receiver will beep and t he green light flash slowly.
How do I sync two collars with one remote transmitter?
The collar should now work with the transmitter. Sync up to three collars with one remote transmitter by turning each collar off one at a time. For the second collar, sync using the same method, but press the lower button on the front of the transmitter for most models, or the middle button for the ProHunter SD-2500.
How do I pair the remote transmitter with the receiver?
Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. You may need to hold both units 2-3 feet from each other before this occurs.
How do I set up my ProHunter remote transmitter?
Stand at least three feet away from the collar and hold the remote transmitter. Push and hold the upper button on the remote transmitter. For most models, this is the button with the circular center. For the ProHunter SD-2500, push the orange button.
How do I program the remote to my ProHunter sd-2500?
Push and hold the upper button on the remote transmitter. For most models, this is the button with the circular center. For the ProHunter SD-2500, push the orange button. Watch the indicator light on the front of the transmitter and stop holding the button after the light has blinked five times.