How do I connect my Plantronics CS540 headset to my Cisco phone?
How do I connect my Plantronics CS540 headset to my Cisco phone?
How to Install Plantronics Wireless Headsets with Cisco Phones
- Install the handset of the phone into the Plantronics Telephone Interface Cable.
- Install the headset base unit into the handset port of the phone. Leave the “headset port” empty.
- Answer/End calls by pressing the call control button on the headset.
Is Plantronics CS540 compatible with Cisco IP phone?
The Plantronics CS540-CIS is compatible with all Cisco IP phones.
Do Plantronics headsets work with Cisco phones?
Plantronics has a wide variety of products made exclusively for Cisco IP phones. Most Cisco IP phones have a dedicated headset port built-in which you can plug a headset directly into. Please see our Direct connect Cisco headset page for the latest headsets recommended for your Cisco phone.
How do I enable headset Hookswitch control on my Cisco phone?
Access the server administrator with a browser. Select Device > Phone through the drop down menus. Open the desired phone. Scroll down to “Wireless Headset Hookswitch Control”, set to “Enabled”, Click “Apply”.
How do I setup my headset on my Cisco IP Phone?
Step 1 Press Applications . Step 2 Select Accessories > Cisco Headset. Step 3 Press Setup and select Microphone > Gain. Step 4 Press the Navigation cluster, left or right, to adjust the gain.
What headsets work with Cisco phones?
Cisco 6900 7800 7900 8900, 9900 Series Wireless/Corded Headset
| Corded Headsets | Wireless Headsets | |
|---|---|---|
| Cisco Phone Model | Plantronics Headsets | Jabra Pro 9400 Series or Jabra Go 6470 Series, Motion Office UC |
| 6851 | Cisco IP Headset | Jabra Link-43 |
| 6945 | Cisco IP Headset | Jabra Link-43 |
| 7821 | Cisco IP Headset | Jabra Link-43 |
What is Hookswitch mode?
Electronic Hookswitch (EHS) is a feature that allows users to start and end calls by pressing buttons on their headset. Not all headsets support electronic hookswitch, and those that do must be connected to an EHS adapter or cable to use this feature.
How do I connect my Plantronics headset to my Cisco phone?
How do I connect my wireless headset to my Cisco IP phone?
To Pair your Bluetooth headset with your Cisco 8851 VOIP phone:
- On the Cisco 8851 phone, hit the Applications options key that looks like a gear.
- Select “Bluetooth” from the menu.
- Select “Add bluetooth device”.
- Put your Bluetooth device in discovery mode.
- Once the Cisco 8851 set finds the phone, hit the “Pair” softkey.
How do I get my Plantronics headset to work?
Press and hold the power button for 5 or 6 seconds until the light starts flashing an alternating red-blue. Release the button and set the headset aside. Follow the pairing instructions for your cell phone or other Bluetooth device. If prompted for a passkey, enter 0000 (four zeros).
How do I pair my Plantronics headset?
To pair the headset,
- Turn on your device’s Bluetooth feature.
- Turn the headset on. The light on the headset should start flashing an alternating red-blue.
- On your cell phone, go to the Bluetooth menu and search for (or add) a device.
- If prompted for a passkey, enter 0000 (four zeros).
How do I get my mic to work on my Plantronics headset?
If your microphone is not working, check the following:
- Make sure that the microphone is not muted.
- Make sure the USB connection is not loose.
- Make sure that your Plantronics headset is selected as the default audio device.
- Make sure the microphone is pointing towards the corner of your mouth.
How do I set up my Plantronics cs540?
Plantronics CS540 Setup, Installation, and Users Guide 1 Step 1: Charge the CS540 Headset for 60-90 Minutes. 2 Step 2: Plug the Telephone Interface Cable into the Base. 3 Step 3: Connecting the CS540 to Your Telephone. 4 Step 4: Understanding Your CS540 Wireless Headset. 5 Step 5: Understanding Your CS540 Base Adjustments. More
How do I connect my cs540 headset to my phone?
Step 1: Charge the CS540 Headset for 60-90 Minutes. Step 2: Plug the Telephone Interface Cable into the Base. Step 3: Connecting the CS540 to Your Telephone. Step 4: Understanding Your CS540 Wireless Headset.
How do I set up handsfree on my cs540 base?
If you have the CS540 base connected to your Cisco phone via the handset port please be sure the settings are as follows. Configuration A, Listen and Speak dials on #3. With this configuration the handset needs to be off hook while on a call and the handsfree button on the Cisco phone in the OFF mode.
How do I connect a cs520 to an 8851?
I use ELECTRONIC HOOK SWITCH CABLE to connect my CS520 with 8851 and it works perfectly. below mentioned cable was used to connect the headset base with the phones. U need to enable Wireless Headset Hookswitch Control on phone when using this cable.