What does a diff drop do 4Runner?

What does a diff drop do 4Runner?

Diff drops are needed to literally drop the differential and differential mounts in order to bring the CV axles closer to factory angle.

What does a front diff drop do?

A diff drop works by modifying the mounting points of the diff and physically lowering it away from the chassis. As the suspension isn’t affected the end result is less angle of operation in the CV joints as the diff and hubs are closer in alignment again.

Is a diff drop necessary?

Not all vehicles/vehicle setups require a diff drop. The general rule to follow is that anything over a 2” suspension lift over stock should consider a diff drop, and those with lifts below this can get away with it.

Do I need a differential drop for a leveling kit?

For a 2.5″ drop, you do not really need a diff drop. I advise using a diff drop. It will maintain suspension geometry close to factory and will make for a much better alignment IMO. @LOTSOFTOYS installs a lot of aftermarket kits and does a ton of alignments and he can give you the best answer on this topic.

Does a lift kit raise the differential?

The only way to increase differential height is to fit bigger tires. If the vehicle’s original tires are 28 inches, 33-inch tires will increase the differential height—and the vehicle height—by 2-1/2 inches. A lift kit will keep your bigger tires from rubbing against fenders or suspension components.

What does a drop kit do?

The diff drop kit, as the name implies, lowers your diff, by way of spacers (pucks) or cradles (brackets), to bring the CV angles back into alignment and closer to the factory specifications. This limits the strain on the CVs, hubs, diff bearings and seals.

How do I lower my CV angle?

To reduce or avoid the risk of CV failure, the differential should be lowered when installing a sus- pension lift. This reduces the CV angles back to within acceptable running tolerances.

What is ECGS bushing?

They all said they fixed the issue with the ECGS (East Coast Gear Supply) bushing which replaces and eliminates the driver side CV axle needle bearing. East Coast Gear Supply is a company and shop based out of North Carolina that specializes in rear ends, axles and differential service.

What is a 3rd gen Tacoma?

The third Toyota Tacoma generation came about in the 2016 model year. Due to the fact that Taco generations run so long, we are still in the third generation. In fact, we don’t really expect to see another one until at least 2024. That said, we still see updates. 2021 Toyota Tacoma | Toyota USA.

What is a differential drop spacer?

Does a lift kit void insurance?

Does a lift kit void insurance? – A lift kit does not void insurance. Still, you need to let your insurance provider know of any modifications, including lift kits, so that you can obtain a proper policy endorsement and have adequate coverage.

Does a body lift void the warranty?

Lifting Your Truck Voids Your Warranty… Lifting your truck past 2” (or at all for some brands, like Toyota) will void the warranty on parts that are affected or damaged by the lift kit. However, anything not related to or affected by the lift kit will still be covered.

What is too much CV angle?

I would suggest going no further than about 15 degrees. You have to remember the cv also goes side to side when you turn so if the angle is steep it will bind real bad and slowly ruin it when turning and they will break constantly when using 4lo.

Does a lift kit affect CV axles?

Axle Binding That’s bad. When you lift a machine without upgrading your axles, your axle’s CV joint angles increase.

How many miles will a 3rd gen Tacoma last?

Generally speaking, most people consider 90K miles on a vehicle to be high, however the Tacoma can run well into 200K miles without major issues.