Is my Mercury engine SmartCraft compatible?
Is my Mercury engine SmartCraft compatible?
Can I use SmartCraft on my older engine? The SmartCraft line of products are applicable to all Mercury/Mariner OptiMax outboard engines starting with Model 2000, and all MerCruiser 8.1 liter engines for Model Year 2001.
What Year Did Mercury start using a 14 pin harness?
In 2006, all SmartCraft mechanical engines switched to a 14‑pin style key switch harness connector. This new harness incorporated all the wires of the 10‑pin blue cable which eliminated the need to route a separate blue cable in the boat.
How does SmartCraft Connect work?
SmartCraft® Connect transforms your favorite multi-function display into an information portal to your boat by providing valuable engine data on the same screen as your GPS chartplotter and sonar. It makes tracking engine performance easy and convenient by putting the data right at your fingertips.
How does mercury SmartCraft work?
Active Trim: An integrated, GPS-based system, Mercury Active Trim continually adjusts engine trim based on changes in the boat’s speed. This intuitive, hands-free system effortlessly delivers optimal trim adjustments, improving performance and fuel economy across the rpm band.
What is the 4 pin connector on the vessel sensor harness used for?
Connect the paddle wheel/sea temperature sensor harness to the boat harness assembly 4‑pin connector. IMPORTANT: To prevent corrosion to the boat harness assembly the 4‑pin connector, when not in use, must be sealed with the weather cap supplied with the kit.
What outboards are compatible with NMEA 2000?
This includes MFDs from Furuno, Garmin, Humminbird, Lowrance, Raymarine and Simrad. Many of today’s large marine engines are also NMEA 2000 compatible, including models from Caterpillar, Evinrude, Honda, MAN, Mercury, Suzuki, Volvo Penta, Yamaha and Yanmar.
What is SmartCraft connect?
What is SmartCraft digital technology?
SmartCraft® is a full suite of digital technologies, fully integrated and totally coordinated. Gauges, sensors, vessel systems, computer-controlled features – one total package, one high level of control. Make your boating experience easier, safer, and a lot more enjoyable.
How do you calibrate a mercury SmartCraft gauge?
Press and hold and for 3 seconds to bring up the CAL 1 calibration screen. NOTE:Press and hold and for 3 seconds to get out of the CAL 1 calibration screen. Press the button to move to the next calibration screen. Select whether you want the power trim display screen to pop up whenever the trim switch is activated.
What are the 4 pins on the trailer connector?
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground.
Which Mercury engines are compatible with SmartCraft connect?
The module can link with all SmartCraft-compatible 2004 or newer, 40hp and higher Mercury engines. Comprehensive Mercury engine data available through NMEA®-capable devices (refer to SmartCraft Connect manual for more information) SmartCraft Connect is compatible with Garmin and Raymarine units capable of running the latest operating software.
How do I connect SmartCraft at the helm?
• If using a component harness with an in‑line resistor, do not use a termination resistor at that end of the helm harness. • If using junction boxes, place one box (4, 6, or 8 port as needed) at the helm for each engine. • If making only one 10‑pin SmartCraft connection at the helm use a 10‑pin female‑to‑female adaptor in place of a junction box.
Can I Connect System Link gauges to any SmartCraft instrumentation harness?
NOTE: You can connect System Link gauges to any SmartCraft instrumentation harness that provides a System Link connector. 3 0 1 2 4 5 6 7 RPMx 1000 TROLL TROLL
What can I monitor with SmartCraft connect?
There’s no need to crowd the dash with additional displays or gauges. From a compatible Garmin or Raymarine display, you can monitor rpm, speed, fuel flow, temperature, trim and more. Contact a Mercury Authorized Dealer for SmartCraft Connect installation and setup.