What is a Ditch Witch used for?
What is a Ditch Witch used for?
It was designed primarily for digging the trenches needed to connect a house’s plumbing system to the main at the street. A landscape contractor from Long Island, New York named Alex Baker purchased the first one and immediately put it to use in digging trenches for sprinkler systems.
Is a Ditch Witch an excavator?
New Ditch Witch HX30G vacuum excavator delivers high-profile power in a low-profile package. PERRY, Okla., Dec. 10, 2019 – Faced with evolving regulations and tightening budgets, today’s contractors need to be economical when it comes to their machine selection.
How deep does Ditch Witch dig?
Size. Smaller models can often dig trenches between 1 and 4 feet deep and between 4 and 16 inches wide. Larger trenchers can dig ditches up to 18 feet deep and 4 feet wide.
Why is it called Ditch Witch?
‘ We began looking for words to put with ‘ditch. ‘ It was getting late in the day, and ‘witch’ rhymed, so that was it, Ditch Witch was the name.” Ed Malzahn on the world’s first service line trencherIn 1951, Malzahn placed the first Ditch Witch ad in Popular Mechanics magazine; it was one column wide, 2 inches deep.
How do ditches work?
A ditch is a small to moderate divot created to channel water. A ditch can be used for drainage, to drain water from low-lying areas, alongside roadways or fields, or to channel water from a more distant source for plant irrigation.
Can you trench wet ground?
Many thousands of gallons of water could be flowing downslope in the soil toward your property and you need to capture it just like a gutter collects rainwater. You do this with a simple trench that can be anywhere from 2 feet to 8 feet or more deep.
Can a Ditch Witch cut through tree roots?
Avoid using a trencher to cut through large tree roots if possible since larger roots increase the likelihood of problems with the cut. Although a trencher can be used to cut through roots, it was designed for creating trenches in soil and may not be able to handle large roots.
Who invented Ditch Witch?
Ed Malzahn
Ed Malzahn, Ditch Witch Founder and Industry Icon, Dies at 94.
How much does a Ditch Witch C16X cost?
Ditch Witch C16X WB Trencher from $1,575.00/mo.
How heavy is a Ditch Witch?
Ditch Witch
| Model | HP | Operating Weight (lbs.) |
|---|---|---|
| RT36 | 35 | 3,940 |
| RT40 | 39 | 4,200 |
| RT55 | 57 | 7,560 |
| RT75 | 71 | 8,670 |
What are road ditches called?
1950 AmSp 25.165 CO, The ditch by the side of an upgraded road is called ‘bar pit,’ ‘borrow pit,’ ‘barrow pit,’ ‘bar ditch,’ ‘borrow ditch,’ ‘barrow ditch,’ ‘grader ditch,’ and ‘gutter. ‘ . . The word pit is much more frequent than ditch or gutter.
What is the fastest way to dig a trench?
What is the Fastest Way to Dig a Trench by Hand?
- Water the soil for 1 hour the day before excavation.
- Use a trenching shovel to quickly excavate the trench.
- Use a pick mattock to dig up rocks and break through tough soil.
How deep should I dig a drainage trench?
A drainage trench should be at least 18 inches deep. This allows you to install a gravel bed, as well as an adequately-sized pipe to carry away water.
What is a 24 trencher?
Equipment Overview Typical applications include installing trenches for phone, internet, or electrical cables, plumbing, and irrigation. As a 24 inch trencher, the walk behind trencher can reach a depth of 24 inches, and is ideal for maneuvering in an enclosed area or a work site with limited space.
What type of machine is a Ditch Witch?
Called the “endless conveyor ditch digging machine,” It was the first mechanized, compact service-line trencher developed for laying underground water lines between the street main and the house.
How big is a Ditch Witch?
At only 32″ (813 mm) wide, the Ditch Witch 1030 walk-behind compact trencher can go anywhere and dig in any type of dirt, thanks to the variety of digging chains it can run, including the patented, super-durable Shark Chain II trencher chain. and it doesn’t mess around, with a digging chain speed of 276 fpm (84 m/min).
How much does a Ditch Witch walk behind trencher weight?
1120 lbs
Trench depth max. 36″, Trench width 4″, Weight 1120 lbs. Length 84″
How much does a Ditch Witch c16x weigh?
1,895
Trencher
| Operating weight (lbs): | 1,895 |
|---|---|
| Max cutting depth (ft/in): | 3′ 0″ |
| Cutting width, min-max (in): | 4″ – 6″ |
| Max chain speed (ft/min): | 366 |
What is a Ditch Witch trencher?
Ed Malzahn riding an early Ditch Witch trencher. Ditch Witch, a trade name of Charles Machine Works, is an American brand of underground utility construction equipment, which has been in operation since 1949. The company is based in Perry, Oklahoma.
Who makes Ditch Witch machines?
Charles Machine Works is itself a subsidiary of Toro Company, the latter acquiring them in 2019. Innovation of Ditch Witch machines started in the 1940s when a compact trenching machine was created to replace the pick and shovel for installation of underground residential utility services.
Is the Ditch Witch still in business?
On December 16, 2002, American Society of Mechanical Engineers President Susan H. Kemp awarded the Ditch Witch organization a bronze plaque designating the DWP as a historical mechanical engineering landmark. ^ Toro immediately announced that the CMW/Ditch Witch operations will remain in Perry.
What is a Ditch Witch fx60 vacuum excavator?
The Ditch Witch FX60 Vacuum Excavator. Ditch Witch, a trade name of Charles Machine Works, is an American brand of underground utility construction equipment, which has been in operation since 1949.