Can you delete the EGR on 6.0 Powerstroke?
In some cases, yes. Installing an EGR delete on 2006 and up 6.0L trucks WILL result in the check engine light. In fact, it will set the check engine light on all Ford 6.0L’s with software that has been updated since about 2005. This means that an EGR delete will set the CEL on most 6.0L’s on the road today.
How do you install a EGR delete?
EGR Delete Kit Installation Steps
- Step1 Disconnecting the Battery and Electrical Harnesses.
- Step 1 Removing the MAP sensor, Air Filter, and Intake Tube.
- Step 2 Removing the Vacuum Line and Actuator Solenoid.
- Step 3 Removing the Electrical Connections.
- Step 4 Removing the Coolant Lines.
- Step 5 Removing the EGR Pipe.
Do you need tuning for EGR delete?
A stage 1 kit only removes the diffuser and plates block the holes left from removing the tube. So if you have a tune you can delete it. If you do not currently have a tune you can not do a delete.
Will EGR delete fail emissions?
If you choose to use an EGR delete kit on your vehicle as a way to bypass your system, then you are 99.99% guaranteed to fail your emissions tests if they’re required by the state.
Can you do EGR delete yourself?
You can perform the EGR Delete yourself if you have the right kit, the right tools and enough confidence to take on the job. Your typical EGR Delete kit will usually come with the following parts: EGR pipe.
Can you bulletproof 6.0 without pulling the cab?
For ultimate working space, the process of pulling the cab quickly became the preferred method of performing a head gasket job on a 6.0L, and to this day 9 out of 10 techs do things this way. But we’ve got news for you: You don’t have to pull the cab to work on this engine.
Does an EGR delete add horsepower?
It may reduce your overall horsepower. The EGR delete kits are often thought about when using an older diesel engine. There are design issues with the previous generation of products that allowed a bypass to make more space for clean air in the combustion chamber.
Can you remove the EGR on a Ford Power Stroke?
That outcome is possible because you are eliminating the exhaust gas recirculation to create a more robust experience. You can obtain an EGR delete kit for most diesel engines, including the 6.0L Power Stroke engine that comes equipped to older Ford® trucks.
How much does it cost to remove the EGR from a diesel?
An EGR delete kit for a Ford 6.0 diesel will run about $329 before labor in most geographic areas. You can find this option online for a similar price. If you plan on doing the work yourself, then a standard set of tools is all that is required to get the job done, which should take a couple of hours or so.
Do I need a tuner for a 2006 EGR delete?
The early 6.0’s wont throw a CEL with an EGR delete but the later years will, so if you have a late model 6.0 you would need a tuner/scanner like SCT to turn off the CEL. So the 2006 model needs to be tuned when you do a egr delete on it I think a lot of it has to do with the strategy of the ECM.
Do I need a sinister EGR delete?
I went with the Sinister kit on my truck, it was more expensive but I read good things about all of their products so I went with them. The early 6.0’s wont throw a CEL with an EGR delete but the later years will, so if you have a late model 6.0 you would need a tuner/scanner like SCT to turn off the CEL.