What is a safe work method statement?
What is a safe work method statement?
A SWMS is a document that sets out the high risk construction work activities to be carried out at a workplace, the hazards arising from these activities and the measures to be put in place to control the risks.
Who needs a safe work method statement?
A person conducting a business or undertaking (PCBU) is required to have a SWMS prepared for high risk construction work before that work commences.
How do you write a health and safety method statement?
The statement must be as simple as possible to avoid any misinterpretations that could result in injury. Everyone involved in the work should read it, understand what is expected of them and follow the measures that are in place to keep them safe.
When Must safe work method statements be used?
A SWMS must be prepared before the high risk construction work begins. A principal contractor must obtain the SWMS before the high risk construction work begins.
What 4 components must the Swms include?
What needs to be included in a SWMS?
- The details of the work that is considered high risk.
- The health and safety hazards relating to the work.
- The control measures that need to be implemented to minimise or remove the risks.
- How the control measures will be actioned?
- When will they be monitored and reviewed?
What is method statement example?
Rather than repeating the information already in a risk assessment, a method statement enhances the information gathered for the risk assessment and goes further in planning the sequence for the activity. For example, the risk assessment might say that supervision is required for the task.
Is a method statement required by law?
While not required by law, method statements are also prepared for many other construction activities and are proven to be an effective and practical way to help plan, manage and monitor construction work.
Does a Swms need to be signed?
Do you have to have actual employees’ signatures on the SWMSs? There is no explicit requirement for a signature to be included on the SWMS under the Work Health and Safety Act 2011 (Act) or the Work Health and Safety Regulations 2017 (NSW) (Regulations).
What should a method statement look like?
A method statement should also include:
- Name of the company.
- Start and completion dates.
- Location of where the task will be carried out, including address.
- Site contact details, including Site Supervisor and who to contact in case of emergency.
- Name of person who completed the method statement.
What is a method statement example?
What are the legal requirements of a method statement?
The method statement must be site specific, reviewed and revised for each job, and communicated to all who are required to work to it. Often in the construction industry, for example, one project finishes and a similar operation is repeated on the next job.
What is the difference between a Swms and a JSA?
SWMS work well as a means of keeping record of worker tasks, whereas a JSA is a short form that outlines hazards associated with a specific role or task.
What is a work method statements Qld?
The primary purpose of a SWMS is to help supervisors, workers and any other persons at the workplace to understand the requirements that have been established to carry out the high risk construction work in a safe and healthy manner. The SWMS: sets out the work activities in logical sequences. identifies hazards.
How do you write a good method statement?
Writing a method statement takes time. You need to go through your activity step by step. Consider the people, the tools, the environment, and how to carry out the work safely. Then write it all down clearly so that it is understood.
What must be in a method statement?
A method statement should also include: Start and completion dates. Location of where the task will be carried out, including address. Site contact details, including Site Supervisor and who to contact in case of emergency. Name of person who completed the method statement.
What is the difference between safe work procedure and method statement?
A safe system of work is a document that formalises how a particular task should be carried out to ensure that it is done safely. These documents are also commonly known as method statements (mainly associated with construction and maintenance related activities).
What is the difference between a risk assessment and a method statement?
In the simplest terms: a risk assessment analyses the risk in the workplace, whilst a method statement outlines what is being done to prevent risk.
What should a good method statement include?
Is a safe work method statement a legal document?
A Safe Work Method Statement (SWMS) is a legal document that enables all people involved with specific high-risk construction work to have a full understanding of the hazards and risks involved with the task and provides controls to manage the risk associated with those hazards.
Do you need a JSA if you have a Swms?
For any regular high-risk work, you will need an SWMS to outline the risks, hazards and procedures associated with any activity. For an activity that is not conducted regularly or that is low or medium risk, you will need a JSA.
What should be in a safe work method statement (SWMS)?
What should be in a safe work method statement (SWMS)? When preparing a SWMS the following must be taken into account: the circumstance at the workplace that may affect the way in which the high risk construction work is carried out on a construction project, the WHS management plan prepared by the principal contractor.
What is a work health and safety management plan?
A work health and safety (WHS) management plan can assist principal contractors to manage their workplace health and safety obligations. The principal contractor for a construction project must prepare a written WHS management plan for the workplace before work on the project commences.
What is a generic safe work method statement?
Generic safe work method statement (SWMS) A generic SWMS may be prepared and used for work activities that are carried out on a regular basis. The content of this type of SWMS may be refined over a number of years and include consultation with workers and other PCBUs.
How to prepare a SWMS for high risk construction?
When preparing a SWMS the following must be taken into account: the circumstance at the workplace that may affect the way in which the high risk construction work is carried out on a construction project, the WHS management plan prepared by the principal contractor. describe how the control measures are to be implemented, monitored and reviewed.