What does monthly duty cycle mean?
What does monthly duty cycle mean?
The monthly duty cycle is the maximum number of pages a printer can print per month without breaking down. You can often find this on the printer specs table on the printer manufacturer web page. Monthly duty cycle varies across printer models.
What is the meaning of duty cycle?
Duty cycle is the proportion of time during which a component, device, or system is operated. The duty cycle can be expressed as a ratio or as a percentage.
What is maximum monthly duty cycle?
Maximum monthly duty cycle is the maximum number of pages a device can be expected to deliver in a month without jams or errors. The recommended monthly page volume is the amount your should expect to print each month in order to keep your machine in optimal condition. Confusing?
What does ot mean when it says the printer has a monthly duty cycle?
If a printer indicates that the duty cycle is 100,000 pages per month. The manufacturer is essentially saying that this is the very maximum volume the printer is capable of in a month.
How do I find duty cycle?
Duty Cycle = Pulse Width (sec) * Repetition Frequency (Hz) * 100.
What do you mean by 50 duty cycle?
If an air compressor has a 50% duty cycle, the compressor can provide air power for half of its total cycle time. Therefore, if the compressor cycles for a total of two minutes, you can draw pressurized air from the machine for durations of 60 seconds.
What is duty cycle of Xerox machine?
The duty cycle is the maximum number of prints/copies the machine can produce in any given month. This number is given by the manufacturer. For example, Xerox’s Versalink C505 has a duty cycle of 120,000 prints/copies per month.
What is a duty cycle example?
For example, if a motor runs for one out of 100 seconds, or 1/100 of the time, then, its duty cycle is 1/100, or 1 percent. Pulse-width modulation (PWM) is used in a variety of electronic situations, such as power delivery and voltage regulation.
What is a 60% duty cycle?
Duty cycle in its shortest explanation means how long a welding machine will weld at a given current before it over-heats. A machine with 300@ 60% will give an output of 300 amps for 6 minutes before overheat. A cooling or rest period maintained for 4 minutes must then be observed.
How do you read duty cycle?
Duty cycle is measured in percentage of ON time. Example: A 60% duty cycle is a signal that is on 60% of the time and off 40% of the time. An alternate way to measure duty cycle is dwell, measured in degrees instead of percent.
What is Epson duty cycle?
The recommended duty cycle is 25%. Epson America’s definition of a 25% duty cycle is the printer printing (not idle) for two hours per day (25% of an eight hour day) for 22 days per month.
What is HP printer duty cycle?
Duty cycle refers to the robustness of a printer or copier. It’s the absolute maximum number (or range) of pages your device can print.